Last Updated on September 10, 2024
Maintaining an RV can sometimes feel like a never-ending adventure, and not necessarily the fun kind. From engine troubles to plumbing issues, there's always something that needs a little TLC. But fear not, fellow RV enthusiasts! Today, we're tackling a problem that's both common and straightforward to fix: a faulty LED marker light. This is an issue that can not only be a nuisance but also a safety concern and a potential cause for fines if left unchecked. We found a great video from the Endless RV YouTube channel that walks you through this simple fix step-by-step. Below are the highlights from the video, and make sure to watch the entire video at the bottom of the article for all the details.
1. Identifying the Problem
The first step in any repair is identifying the issue. In this case, one of the five marker lights on the RV is out. Izzy from Endless RV points out that this could be considered a life safety issue by an inspector and might even get you pulled over and fined. Imagine explaining to an officer that your RV is just playing hard-to-get with its lights!
2. Gathering the Tools
Next, you'll need to gather your tools. The essentials include an LED replacement light, butt connectors, a Klein wire stripping tool, a Klein crimping tool, a plastic spatula, vice grips, pliers, pick tools, electrical tape, and silicone. Izzy humorously notes that you might not need all these tools, but hey, better safe than sorry, right? Plus, who doesn't love an excuse to buy more tools?
3. Removing the Old Light
Removing the old light is straightforward. Using vice grips, you simply pull out the faulty light, cut the wires, and strip them. Izzy makes it look so easy that you might wonder if he's secretly a magician. Just make sure you don't accidentally pull a rabbit out of your RV's electrical system!
4. Installing the New Light
Once the old light is out, it's time to install the new one. Twist the wires together, use the butt connectors to secure them, and then crimp everything tightly. Izzy demonstrates how to use the Klein tools for a perfect crimp every time. If only fixing everything in life were this satisfying!
5. Sealing the Deal
Finally, you'll want to seal everything up with electrical tape and silicone. This ensures that the new light stays in place and is protected from the elements. Izzy jokes about the unpleasant smell of silicone, suggesting that maybe they should make a scented version. Imagine fixing your RV while enjoying the aroma of fresh pine or lavender!
And there you have it! A simple, cost-effective way to fix a faulty LED light on your RV. Don't forget to watch the full video:
